Lot No.34, Jalan TPP 1/10,
Taman Industri Puchong,
Batu 12, Jalan Puchong,
47160 Puchong,
Selangor, Malaysia.
+603-8061 4828
+603-8061 4833
Young Jou Machinery Sdn Bhd
Lot No.34, Jalan TPP 1/10,
Taman Industri Puchong,
Batu 12, Jalan Puchong,
47160 Puchong,
Selangor, Malaysia.
Lot No.34, Jalan TPP 1/10,
Taman Industri Puchong,
Batu 12, Jalan Puchong,
47160 Puchong,
Selangor, Malaysia.
YJ-6516F
| Previous | 4 / 12 | Next |
HORIZONTAL TYPE AUTO FEEDING TAPPING MACHINE (GEAR PITCH TYPE) F-SERIES
MODEL: YJ-6516F
Feature:
Pneuamtic YJ-4508F
Hydraulic YJ-6516F (YJ-6532F)
Specification:
- Max & Min thread diameter of tapping: Dia.5-16mm
- Max & min length of tapping: 6-120mm
- Max & min across corner or diameter: 6-30mm
- Main motor: 1HPx6P
- Cooling oil pump: 1/4HP
- Cooling oil tank's capacity: 30liter
- Clamp working-pieces'power: Hydraulic
MODEL: YJ-6516F
Feature:
- No matter dose the threads have chips or not which are all suitable this machine.
- Available for through hole and blind hole.
- it's a mechanical movement, the machine is fully automatic one user can operate several machines in the same time.
- Gear-Pitch type auto tapping will get finished produnt with precise and accurate threading.
- The tapping depth very prouise & for blind hole tapping is very suitable.
- It euipped with a safe device to monitor the feeding, torque, radial & clamping. It ensures to prolong taps life & safty.
- It governed by PLC control.
- It is easy and quick to change the different tools.
- Auto checking of defective products and auto stop if abnormal.
- Can option two spindle processing simultaneous to make production double and enhance efficiency.
- It can option to install converter or use servo motor to control the spindle speed.
Pneuamtic YJ-4508F
Hydraulic YJ-6516F (YJ-6532F)
Specification:
- Max & Min thread diameter of tapping: Dia.5-16mm
- Max & min length of tapping: 6-120mm
- Max & min across corner or diameter: 6-30mm
- Main motor: 1HPx6P
- Cooling oil pump: 1/4HP
- Cooling oil tank's capacity: 30liter
- Clamp working-pieces'power: Hydraulic
